Natural Gas is Not Clean Energy

July.03.2012

natural gas tracking is not clean energyThe production of coal energy is coming to an end with the last Ontario plant scheduled for closure in 2014. Now Canadians are looking to other sources of fuel for electricity production to make up the base and demand loads necessary to guarantee an uninterrupted supply to homes and industry. With nuclear energy proving too expensive and potentially dangerous, many countries are turning to natural gas as a viable alternative. Now some environmentalists are questioning claims that natural gas is a clean, green source of energy.

“The large GHG footprint of shale gas undercuts the logic of its use as a bridging fuel over the coming decades, if the goal is to reduce global warming,” says Professor Robert Howarth, Cornell University. The objection to natural gas is twofold: there are substantial carbon emissions during energy production and the process of fracking (which is used when mining natural gas) contributes just as much to global warming as coal-fired plants do.

Energy Production

Natural gas originally won its green-energy status because its carbon emissions are about half those of coal-fired energy plants. Natural gas is a non-renewable resource that is extracted, cleaned and then burned in turbines and boilers to create steam, power turbines and produce electricity. Plants powered by gas do output reduced nitrogen oxide and carbon monoxide emissions when compared to coal-burning plants. However, methane released when gas is not completely burned, as well as during the production of natural gas negate the positive aspect gas plants enjoy.

Fracking

natural gas tracking is not clean energyFracking is the process of extracting natural gas that is trapped deep beneath shale beds. Long wells are drilled to the gas reserves (usually about 1km or deeper). A mixture of chemicals, water and sand is then pumped into the ground to force the gas up through fissures in the shale where it is collected. We are not entirely sure what impact fracking has on the environment as the cocktail of chemicals used in the process has been deemed a ‘trade secret’. We are, however, able to measure the emissions from plants that produce natural gas. A February 2012 study discovered that the production, transportation and burning of natural gas caused the release of considerable amounts of methane into the atmosphere.

Fracking has also been linked to water pollution, earthquakes and the destruction of pristine environments. New studies show that the chemical cocktail used in fracking will leach into groundwater aquifers sooner than expected. France and Bulgaria have banned fracking in reaction to environmental concerns, but the practice is still enjoying unprecedented growth in the US, Canada, the UK, Australia, China and other countries. In the US, shale gas accounts for about a quarter of the nation’s gas production. 70% of gas wells in Canada utilize fracking in the extraction processes.

Gas Leaks

The EPA sets the average leakage of gas production plants at 3.3% and that number increases to 9.7% where fracking is employed to extract gas. Natural gas consists of 85% methane and is a whopping 105 times worse for global warming than other greenhouse gas emissions. Methane on its own is 25 times better at trapping heat in the atmosphere than carbon dioxide. When methane reacts with aerosols in the atmosphere, this global warming effect is compounded.

The idea that natural gas may provide a panacea to our energy needs is being challenged. This has not had a discernible impact on the growth of gas plants according to Sheamus MacLean of Economic Performance Architects. Cheap gas prices have led to the adoption of this form of energy production over renewable energy sources like wind or solar. Reliance on natural gas energy may prove to be a leap from the frying pan into the fire due to the global warming and environmental impacts of gas extraction and energy production.

DEGERenergy Solar Tracking Systems Supersize your Output

March.23.2012

Solar tracking systems by DegerDEGERenergy tracking units allow solar panels to track the sun’s trajectory across the sky and can improve the solar output of your system by 20-45%. The DEGERenergy system rotates the panels to maximize energy yields and efficiency. This improves your ROI and puts more Sun Money in your pocket. The OPA’s FIT and microFIT tariff programs pay a premium for solar power generated by individuals or businesses. Installing a solar panel system on your home, business, school or church will enable you to create energy you can be proud of and a make whole bundle of Sun Money to boot.

New Feed-in tariff rates

As the OPA readies itself to announce its new rates next week, solar installers are raring to go. Solar installations have ground to halt since the OPA announced its intention to change its rates in October of last year. The plethora of solar power installation companies that have sprung up since the FIT and microFIT programs were put into effect are under strain as their installations have been brought to a standstill. Now, with the program slated to bust into action this spring, home and business owners are looking at which option offer the best returns.

Best idea ever

Installing base of Deger TrackerOne of this year’s hottest sellers is the DEGERenergy tracking unit. This amazingly clever device is installed on ground-mounted or roof-mounted panels to maximize your solar output. You can have one of these puppies in your back yard or on an unobstructed area of your business premises, school yard, church grounds, parking lot or sports field. The DEGERenergy tracking unit adjusts the panels throughout the day so that they are oriented in the position that ensures maximum solar energy yields. Two sensor cells in the DEGERenergy tracker monitor solar energy and adjust the panel orientation accordingly. A third sensor cell resets the panels every morning. Adverse weather? No problem as the DEGERenergy unit orients the panels to make the most of radiation in inclement weather.

Make more money, faster

DEGERenergy tracker systems offer several benefits over static solar panel arrays:

  • Increases solar output by 20-45% which increases your feed-in tariff payments
  • Comes with a standard five-year warranty
  • Easy to install
  • Maintenance free
  • Improves ROI
  • Flexible; suitable for all current modules and inverter types
  • 99.9% recyclable

The patented DEGERenergy tracker system is especially designed to withstand strong winds and is storm-resistant in any position. Advanced German engineering is coupled with Canadian and US manufacturing expertise to create a truly remarkable product.

Deger base and mast in concreteThe DEGERenergy tracking unit does not add much to your solar panel installation bill, but it does reduce your payoff period. The increased efficiency that DEGERenergy trackers give your solar panel installation increases your feed-in tariff income and helps you get a return on your investment in no time at all.

Choose a certified contractor

Not all solar panel installation companies are created equally. Many small businesses have sprung up around the solar industry and you must practice caution when shopping for a solar panel installation company that has your best interests at heart. DEGERenergy tracking systems can only be installed by certified installers in order to validate the five-year warranty. Ask your dealer if they have certification and check that they have installed a DEGERenergy tracking system before.

Comments 2